1967 F41 Spring information and source - NCRS Discussion Boards

1967 F41 Spring information and source

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Gary F.
    Frequent User
    • April 1, 1983
    • 36

    1967 F41 Spring information and source

    Looking for information on the 3832518 front coil spring for a 1967 L71 car. Is the 550 lb/inch rate and 12.25 free length correct? What is the wire size and the number of coils? Who is a good source for this spring?
  • Joe L.
    Beyond Control Poster
    • February 1, 1988
    • 43211

    #2
    Re: 1967 F41 Spring information and source

    Originally posted by Gary Fancher (6474)
    Looking for information on the 3832518 front coil spring for a 1967 L71 car. Is the 550 lb/inch rate and 12.25 free length correct? What is the wire size and the number of coils? Who is a good source for this spring?

    Gary-----


    As far as I know, the 550 in/lb rate is correct. I measure the free length of NOS examples of the springs at 12" but it's possible it's 12-1/4". Measuring these springs is a little "imprecise".

    The wire size is 11/16" and, by my count, 7 coils.
    In Appreciation of John Hinckley

    Comment

    • David B.
      Very Frequent User
      • March 1, 1980
      • 689

      #3
      Re: 1967 F41 Spring information and source

      3832518
      H Rate per inch 5.50
      X Active coils 5.67
      Y Total coils approx. 7.093
      W Cutting off length 100.16
      S Approx. free height overall 12.403
      R Approx. free height 10.842
      V "Dia shown are theoretical only" .680
      etc. etc. etc.

      Comment

      • Hebert K.
        Frequent User
        • September 5, 2011
        • 33

        #4
        Re: 1967 F41 Spring information and source

        Here are pictures of the springs from my 67 L71
        F41 Front Springs 3.jpg67 F41 Springs 2.jpgF41 Front Springs 2.jpgP7120014.jpg

        Comment

        Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"