Distributor cap questions? - NCRS Discussion Boards

Distributor cap questions?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Gary S.
    Extremely Frequent Poster
    • July 31, 1992
    • 1632

    Distributor cap questions?

    I will shortly be bringing my 1972 LT-1 out of hibernation and I plan on replacing some components, one of which is a no-name distributor cap. The various catalogs sell Delco reproductions, no-name black caps, and Dr. Rebuild says he has one with "Patent Pending R". Does anyone have experience with either Dr. Rebuild's as far as functionality and appearance for judging. At this point I am not chasing points, I just want to continue to drive my car. Oth, if his cap judges well and performs well, then I might do it. And finally, are there any functionality issues with a no-name distributor cap versus one that has some of the judging attributes? My no-name has been on the car since I bought it so its age is unknown but at least 18 years old with about 10000 miles on it.

    Thank you in advance.

    Gary
  • Joe L.
    Beyond Control Poster
    • February 1, 1988
    • 43211

    #2
    Re: Distributor cap questions?

    Originally posted by Gary Schisler (21316)
    I will shortly be bringing my 1972 LT-1 out of hibernation and I plan on replacing some components, one of which is a no-name distributor cap. The various catalogs sell Delco reproductions, no-name black caps, and Dr. Rebuild says he has one with "Patent Pending R". Does anyone have experience with either Dr. Rebuild's as far as functionality and appearance for judging. At this point I am not chasing points, I just want to continue to drive my car. Oth, if his cap judges well and performs well, then I might do it. And finally, are there any functionality issues with a no-name distributor cap versus one that has some of the judging attributes? My no-name has been on the car since I bought it so its age is unknown but at least 18 years old with about 10000 miles on it.

    Thank you in advance.

    Gary

    Gary------


    I cannot comment on the reproductions since I have no experience with them. However, your "no name" cap could very well be a Delco cap. MANY years ago the Delco SERVICE caps lost their external embossments. For a long period of time thereafter they did have a Delco embossment inside the cap on the top surface. Later yet, when Delco got out of the distributor cap manufacturing business, the caps were "outsourced" and lost all embossments.
    In Appreciation of John Hinckley

    Comment

    • Mark E.
      Extremely Frequent Poster
      • April 1, 1993
      • 4528

      #3
      Re: Distributor cap questions?

      My God, Joe- How do you keep up and remember this kind of minutia?
      Mark Edmondson
      Dallas, Texas
      Texas Chapter

      1970 Coupe, Donnybrooke Green, Light Saddle LS5 M20 A31 C60 G81 N37 N40 UA6 U79
      1993 Coupe, 40th Anniversary, 6-speed, PEG 1, FX3, CD, Bronze Top

      Comment

      • Dick W.
        Former NCRS Director Region IV
        • June 30, 1985
        • 10483

        #4
        Re: Distributor cap questions?

        Bill Clupper either posted here or wrote an article for The Restorer Magazine ​ several years back. I cannot remember the particulars but the Patent Pending R continued many years after the patent was issued.
        Dick Whittington

        Comment

        • Leif A.
          Extremely Frequent Poster
          • August 31, 1997
          • 3625

          #5
          Re: Distributor cap questions?

          Gary,
          I use this cap from K&B and it functions and judges very well. This is a link to LIC but you can buy it directly from K&B, as well.
          Leif
          '67 Coupe L79, M21, C60, N14, N40, J50, A31, U69, A01, QB1
          Top Flight 2017 Lone Star Regional

          Comment

          • Gary S.
            Extremely Frequent Poster
            • July 31, 1992
            • 1632

            #6
            Re: Distributor cap questions?

            Thank you Leif. In reviewing the site and your car, this cap does not contain the "R" which I read is correct up through 68.

            So, no one has the Doc Rebuild? Even though he says to not buy this if you are chasing point?

            Gary
            Last edited by Gary S.; March 2, 2020, 02:54 PM.

            Comment

            • Mike M.
              NCRS Past President
              • May 31, 1974
              • 8381

              #7
              Re: Distributor cap questions?

              say a prayer for bill clipper, a past present of NCRS in the mid to late 80's. He's in an extended care facility with Alzheimers. mike

              Comment

              • Harry S.
                Extremely Frequent Poster
                • July 31, 2002
                • 5293

                #8
                Re: Distributor cap questions?

                Originally posted by Mike McCagh (14)
                say a prayer for bill clipper, a past present of NCRS in the mid to late 80's. He's in an extended care facility with Alzheimers. mike
                Mike, will do. Thanks for letting us know.


                Comment

                • Terry M.
                  Beyond Control Poster
                  • September 30, 1980
                  • 15595

                  #9
                  Re: Distributor cap questions?

                  Originally posted by Dick Whittington (8804)
                  Bill Clupper either posted here or wrote an article for The Restorer Magazine ​ several years back. I cannot remember the particulars but the Patent Pending R continued many years after the patent was issued.
                  Bill's story was in The Restorer, and was about the length of the rotor contact.
                  Terry

                  Comment

                  Working...
                  Searching...Please wait.
                  An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                  Please push the back button and reload the previous window.'
                  An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                  Please push the back button and reload the previous window.'
                  An internal error has occurred and the module cannot be displayed.
                  There are no results that meet this criteria.
                  Search Result for "|||"