1960 wiper

[Mike S.]

any source on windshield wiper motor mounting pulley plate? that the wiper cables hook into. thanks

[Frank D.]

Re: 1960 wiper

any source on windshield wiper motor mounting pulley plate? that the wiper cables hook into. thanks

Jay Maxwell may be able to help out or maybe Vette Gal or Fuelie Dave - there should be a few floating around from all the restomods and many owners switched to Rain Gear wiper setups. You could post a WTB (Want To Buy) ad in the C1/C2 section of the Corvette Forum if you are a member...

[Jim D.]

Re: 1960 wiper

You could post a WTB (Want To Buy) ad in the C1/C2 section of the Corvette Forum if you are a member...

And have not been sent to band camp.

[Frank D.]

Re: 1960 wiper

That's becoming a mark of distinction...but I've never been banned.....

This is one tough part to find; here is the best I could do, original, but a small piece of one of the cable "keepers" has broken off (its included in the sale)...it contains one of two retaining "fingers" that secure the cable...

https://www.ebay.com/itm/ORIGINAL-1958-1962-Corvette-Wiper-Motor-Mount-Plate-with-Pulley-GM-58180-12/223483157607

For $25 I'd snap this baby up and see if I could find a way to move parts off my old one (if you have it) or do a repair somehow....I think you could fabricate another keeper but I'm not sure how they attach.. Based on the attached picture, It looks like a single "U" shaped piece that is riveted into the drum. I think I could devise something to capture that cable securely if it was do or die....

Good luck.

[Mike S.]

Re: 1960 wiper

Thanks guys i found one at rare corvettes . Joe calcagno 831-475-4442