1970 wiper door vacuum troubleshooting - NCRS Discussion Boards

1970 wiper door vacuum troubleshooting

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • William H.
    Very Frequent User
    • January 1, 2006
    • 209

    1970 wiper door vacuum troubleshooting

    I have a 70 and want to ask if someone has troubleshooting guide for the wiper vacuum system. Upon start-up, the wiper door rises then closes (once vacuum is established) and then the system operates normally. Is probably on the driver side of firewall but would like to follow the proper steps. Thanks for your help.

    Bill
    Bill Hyndman

    The 'Sound of Freedom' if not a UH-60 Blackhawk, then it must be a Corvette!

    1962 Big Brake Fuelie
    1965 Fuelie Convertible
    1968 L89 Convertible
  • Bob W.
    Very Frequent User
    • December 1, 1977
    • 802

    #2
    Re: 1970 wiper door vacuum troubleshooting

    Bill, Check out Dr. Rebuild's web page as he has a troubleshooting guide.

    Bob

    Comment

    • Anthony F.
      Expired
      • February 7, 2014
      • 79

      #3
      Re: 1970 wiper door vacuum troubleshooting

      I've had this identical problem two times in 47 years. Check the rubber plug on the back of the wiper vacuum canister, under the flexible boot. It can be dislodged by the linkage running through it. Takes a few seconds to check.
      Attached Files

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"