1957 Trunk Emblem bezel not flush - NCRS Discussion Boards

1957 Trunk Emblem bezel not flush

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dan P.
    Very Frequent User
    • December 1, 1990
    • 683

    1957 Trunk Emblem bezel not flush

    The trunk plastic emblem has 3 lugs that hold it tight to the bezel and body of the car . But they stick up a little and holds the bezel off of the body creating a gap . I can file them down but before I do has any one else ran into this .

    Attached Files
  • Brad H.
    Expired
    • August 12, 2007
    • 724

    #2
    Re: 1957 Trunk Emblem bezel not flush

    Dan if memory serves, the pieces fasten and rotate to conform to the body tight. Some one who has done one recently will get it right.

    Comment

    • Dan P.
      Very Frequent User
      • December 1, 1990
      • 683

      #3
      Re: 1957 Trunk Emblem bezel not flush

      The plastic part has a flat spot at the top and the bezel has a flat shoulder that lines up to the plastic piece.

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"