Blower motor to Blower box mounting screws

[John J.]

What type of screws hold the blower motor to the blower box? And are they painted or what finish is screw?

[David S.]

Re: Blower motor to Blower box mounting screws

John use unpainted pan head screws to attach blower motor to blower box. Blower box to distribution box pan head screws with flat washers.
See attached pictures
Dave

[John J.]

Re: Blower motor to Blower box mounting screws

Thank you David.

[John J.]

Re: Blower motor to Blower box mounting screws

David, one more question. On the engine side, the air plenum that the air hose attaches to, the small headed screws that hold it to the heater, what finish are thos little screws?

Thanks again.

[David S.]

Re: Blower motor to Blower box mounting screws

Hi John, I have attached four pictures showing the area in question.
first two pictures are from the bowtie car the next two from another unrestored car but not a bowtie. Each one shows the same. No overspray on these items. You can see the screws in question recessed head hex. also the unpainted plenum
Dave

[John J.]

Re: Blower motor to Blower box mounting screws

Thank you again David.