master cylinder mounting bolts - NCRS Discussion Boards

master cylinder mounting bolts

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • John J.
    Frequent User
    • May 31, 1994
    • 59
    #1

    master cylinder mounting bolts

    What are the correct mounting bolts on the master cylinder? Judging book says WB1C, repo houses selling TR headed bolts.
    Tags: None
      • Top
    • Mike M.
      NCRS Past President
      • May 31, 1974
      • 8381
      #2
      Re: master cylinder mounting bolts

      WB1C's in all he 56-57's I've restored. mike
        • Top

        Comment

        • John J.
          Frequent User
          • May 31, 1994
          • 59
          #3
          Re: master cylinder mounting bolts

          Thanks Mike.
            • Top

            Comment

            • David B.
              Very Frequent User
              • March 1, 1980
              • 689
              #4
              Re: master cylinder mounting bolts

              Bolt # 122145 is 3/8-16 x 1-1/4 long zinc
              JM has length listed incorrect, does not list finish
              Washer # 103321 is 3/8 plain
                • Top

                Comment

                • Steven B.
                  Extremely Frequent Poster
                  • June 30, 1982
                  • 3985
                  #5
                  Re: master cylinder mounting bolts

                  WB1C on my Dec 56 assembly car. MC never been off. Steve
                    • Top

                    Comment

                    • Dan P.
                      Very Frequent User
                      • December 1, 1990
                      • 683
                      #6
                      Re: master cylinder mounting bolts

                      Paragon has repo WB1C but the heads are not correct .Richard Fortier probably has them.
                        • Top

                        Comment

                        • Patrick S.
                          Very Frequent User
                          • January 1, 1988
                          • 209
                          #7
                          Re: master cylinder mounting bolts

                          All 3 of the bolts on #5813 are WB1C.
                            • Top

                            Comment

                            • Salvador B.
                              Frequent User
                              • May 11, 2008
                              • 50
                              #8
                              Re: master cylinder mounting bolts

                              Would anyone have a source for buying the correct mounting bolts for the master cylinder of a 57?
                                • Top

                                Comment

                                • John J.
                                  Frequent User
                                  • May 31, 1994
                                  • 59
                                  #9
                                  Re: master cylinder mounting bolts

                                  Call Richard Fortier. He is listed in the NCRS magazine. Let me know if you need his number.
                                    • Top

                                    Comment

                                    • Salvador B.
                                      Frequent User
                                      • May 11, 2008
                                      • 50
                                      #10
                                      Re: master cylinder mounting bolts

                                      Looked in both the NCRS Restorer and Driveline magazines. Couldn't find his number. Could you get it for me?
                                        • Top

                                        Comment

                                        • David K.
                                          Very Frequent User
                                          • September 30, 1979
                                          • 240
                                          #11
                                          Re: master cylinder mounting bolts

                                          Salvador
                                          page 30 & 31 in the latest Driveline is his Ad
                                          810-750-1472
                                            • Top

                                            Comment

                                            • Salvador B.
                                              Frequent User
                                              • May 11, 2008
                                              • 50
                                              #12
                                              Re: master cylinder mounting bolts

                                              Found it! Thanks. Didn't realize he had an ad. Wasn't looking for that.
                                                • Top

                                                Comment

                                                • Pat H.
                                                  Very Frequent User
                                                  • December 1, 1996
                                                  • 419
                                                  #13
                                                  Re: master cylinder mounting bolts

                                                  try Rich Pasqualone 610-462-4441 email richp6372@gmail.com I found nice original bolts for my 59 that no-one else could provide.
                                                    • Top

                                                    Comment

                                                    Previous template Next
                                                    Working...
                                                    Searching...Please wait.
                                                    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                                                    Please push the back button and reload the previous window.'
                                                    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                                                    Please push the back button and reload the previous window.'
                                                    An internal error has occurred and the module cannot be displayed.
                                                    There are no results that meet this criteria.
                                                    Search Result for "|||"