"62" body mount reinforcements - NCRS Discussion Boards

"62" body mount reinforcements

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Carl R.
    Frequent User
    • October 31, 2018
    • 63

    "62" body mount reinforcements

    This question is for any C-1 judge. I would like to know if it is all right to use pop-rivets to install new body mount reinforcement plates. Since this area is closed in and can not get to the back side of the plate in the rocker panel area to support the back of the original style rivet to hammer the rivet in solid. Or will I have to cut holes in the rocker panel area to use the proper rivets. This question also applies to any other area on the car where there is no access to the back side of plates that have to be replaced with the original style rivets.
  • Mike E.
    Extremely Frequent Poster
    • February 28, 1975
    • 5138

    #2

    Comment

    Working...
    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"