1964 FI water pump bypass hose clamp size?

[Dan H.]

Picked up several 64 FI heater hose clamps, some are A 4 1/2 and 2 have 2 A 4 3/4. What are the correct locations/applications of these on the engine? Thanks for the help.
Dan

[Don H.]

Re: 1964 FI water pump bypass hose clamp size?

Dan
it's not fair that people are ignoring your question. So, I will offer this previous thread by Larry Meyer that has some answers for you.
https://www.forums.ncrs.org/showthre...ass+hose+clamp

[Dan H.]

Re: 1964 FI water pump bypass hose clamp size?

Thanks Don, that's what I was looking for, some rare pieces to find but now we know what to keep looking for.
Dan

See you in Vegas.

[John D.]

Re: 1964 FI water pump bypass hose clamp size?

My hood is up on my 63 the LWC so I just looked at the original bypass hose clamps. The only reason they are on my car is that Bob Jorjorian gave them to me in 2008. Maybe 2009.. They are extremely difficult to find. Used on '63 to '65. Hard to read the numbers with all the orange paint. Not my idea but you guys like orange overspray.
4-3/4".Slotted Fillister screw with a square nut. I used to look at the show cars for these correct clamps and never saw a one that ware rear deal.
John

[Alan D.]

Re: 1964 FI water pump bypass hose clamp size?

Here is what they look like however you need the 4 3/4 one for said location. Don't think I ever found one (car in air & I don't remember) Good Luck with search.

[Richard G.]

Re: 1964 FI water pump bypass hose clamp size?

Here is another set;


They were on my car till it was taken off the road in 1980.