1995 LT1 Coupe - Originality and having OE Bilstein shoks rebuilt - NCRS Discussion Boards

1995 LT1 Coupe - Originality and having OE Bilstein shoks rebuilt

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Chris G.
    Frequent User
    • October 22, 2006
    • 94

    1995 LT1 Coupe - Originality and having OE Bilstein shoks rebuilt

    Wondering if anyone knows the correct shock(s) part numbers for a 95 couple FE1 6speed car. I could not find it in the manual. Also, want to send my OE Bilsteins back to factory for rebuild but have heard you don't always get same shock back plus I wonder if they strip the finish and replace the stickers. I have emailed Bilstein but haven't gotten an answer yet. Also , where is the Julian date on the 95 C4 shocks? Thanks in advance!
  • David H.
    Extremely Frequent Poster
    • June 30, 2001
    • 1481

    #2
    Re: 1995 LT1 Coupe - Originality and having OE Bilstein shoks rebuilt

    Chris,

    Re date codes, review Dave Perry’s response in thread below.

    https://www.forums.ncrs.org/showthread.php?109414-Bilstein-Date-Code&highlight=bilstein


    Dave
    Judging Chairman Mid-Way USA (Kansas) Chapter

    Comment

    • Rick A.
      Extremely Frequent Poster
      • July 31, 2002
      • 2147

      #3
      Re: 1995 LT1 Coupe - Originality and having OE Bilstein shoks rebuilt

      Chris - hopefully, you have viewed the following link on having a Bilstein shock rebuilt via their service

      Rick Aleshire
      2016 Ebony C7R Z06 "ROSA"

      Comment

      • Chris G.
        Frequent User
        • October 22, 2006
        • 94

        #4
        Re: 1995 LT1 Coupe - Originality and having OE Bilstein shoks rebuilt

        Thanks for the links and date code links. I have emailed Bilstein, I just want to make sure they wont strip the outer coating off and send back without correct exterior. I just want internals done to my shocks- no sending me shocks off the shelf. Has anyone used them before and how did the shocks look when performed. I have used them before for my track car so I didn't pay attention to exterior detail.

        Comment

        • Joe L.
          Beyond Control Poster
          • January 31, 1988
          • 43191

          #5
          Re: 1995 LT1 Coupe - Originality and having OE Bilstein shoks rebuilt

          Originally posted by Chris Gilliand (46396)
          Wondering if anyone knows the correct shock(s) part numbers for a 95 couple FE1 6speed car. I could not find it in the manual. Also, want to send my OE Bilsteins back to factory for rebuild but have heard you don't always get same shock back plus I wonder if they strip the finish and replace the stickers. I have emailed Bilstein but haven't gotten an answer yet. Also , where is the Julian date on the 95 C4 shocks? Thanks in advance!
          Chris-----

          The front shocks were GM #22064673 and the rears GM #22064674. However, these are SERVICE part numbers and may or may not be the same as the numbers actually stamped on the shocks. Regardless, the shocks would be the same as those originally installed on the car.
          In Appreciation of John Hinckley

          Comment

          • Chris G.
            Frequent User
            • October 22, 2006
            • 94

            #6
            Re: 1995 LT1 Coupe - Originality and having OE Bilstein shoks rebuilt

            Thank you!
            Originally posted by joe lucia (12484)
            chris-----

            the front shocks were gm #22064673 and the rears gm #22064674. However, these are service part numbers and may or may not be the same as the numbers actually stamped on the shocks. Regardless, the shocks would be the same as those originally installed on the car.

            Comment

            Working...
            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"