Fuel sending unit ohms 62 Corvette

[John N.]

What are the ohms Full? Empty? 62Corvette.
Thanks!!!

[Richard M.]

Re: Fuel sending unit ohms 62 Corvette

John,

Full apx 30.


Empty zero.

[Bob W.]

Re: Fuel sending unit ohms 62 Corvette

Rich Would these numbers be the same for all C1 units?

Bob

[Bob W.]

Re: Fuel sending unit ohms 62 Corvette

Richard you sent the photos to the wrong thread I know were they should be. What I asked was will these numbers be the same for all c1 units.

Thanks again Bob

Easy mistake YOUR STILL #1 IN MY BOOK

[Richard M.]

Re: Fuel sending unit ohms 62 Corvette

Richard you sent the photos to the wrong thread I know were they should be. What I asked was will these numbers be the same for all c1 units.

Thanks again Bob

Easy mistake YOUR STILL #1 IN MY BOOK

Ooops, to answer it....
Ohms same 56 to 62, and probably 53 to 55.

[Bob W.]

Re: Fuel sending unit ohms 62 Corvette

Richard Thanks for the reply. S@#t happens!!

Bob

[John N.]

Re: Fuel sending unit ohms 62 Corvette

Thanks!!! Anyway to make a 30ohm sending unit work with a 90ohm Steward Warner Guage?

[Richard M.]

Re: Fuel sending unit ohms 62 Corvette

John,

60 ohms in series with the sender would allow the gauge to read FULL(30+60), but it will never read EMPTY.

There are gauge converters available, however pricey. These use circuitry to convert the sender value to the gauge input specs.

Classic Instruments may have a solution....

http://www.yogisinc.com/index.cfm/page/ptype=results/category_id=3725/mode=cat/cat3725.htm

More choices HERE.

Rich