1963 Heater Duct Extension on driver side (the snout)

[Gerald C.]

Do any of you 63 owners have one of these on your car so that I can see how to install one for my car. Pictures would be great!

Thanks,

Jerry

[Bob R.]

Re: 1963 Heater Duct Extension on driver side (the snout)

Jerry here is a photo of the snout I got for my car the front of the snout has a clip that will catch on the heater box and the rear is attached with a screw. If you look up at the heater box from the drivers side you can see a small opening in the front of the heater box which lines up with a recess in the radio side cover for the snout to fit in. I don't have any pictures of it actually installed. If no one answers with a photo I'll lower the car down and get you one.

[Joseph S.]

Re: 1963 Heater Duct Extension on driver side (the snout)

Jerry, Here is a photo of the snout mounted on my 63. It has never been off.

[Duke W.]

Re: 1963 Heater Duct Extension on driver side (the snout)

The forward end has a rectangular "hook" that engages a rectangular hole in the heater case. Then you install the screw. I can't see the "hook" in your photos. Maybe it's broken off.

[Harry S.]

Re: 1963 Heater Duct Extension on driver side (the snout)

https://www.forums.ncrs.org/showthread.php?97358-63-first-design-heater-air-duct&highlight=snout

Jerry, using the search option may help greatly.

[Gerald C.]

Re: 1963 Heater Duct Extension on driver side (the snout)

Thanks everyone!