seals and gaskets

[Phil A.]

Is there a seal or gasket between a power brake booster and master cylinder on a 1971 Corvette? if so where or who sells them? Thanks in advance.

[Joe L.]

Re: seals and gaskets

Is there a seal or gasket between a power brake booster and master cylinder on a 1971 Corvette? if so where or who sells them? Thanks in advance.

Phil------


Yes, there is. It was GM #3910048 but it's been GM-discontinued for a very long time. I do not know of an alternate source for it but there may be one.

[Paul O.]

Re: seals and gaskets

Phil
check out these 2.

http://www.zip-corvette.com/68-82-c3/brakes/63-82-rear-master-cylinder-foam-seal.html

http://www.parts123.com/corvettecentral/dyndetail.pta?catalog=0000050g&ukey=40257

[Joe L.]

Re: seals and gaskets

Phil
check out these 2.

http://www.zip-corvette.com/68-82-c3/brakes/63-82-rear-master-cylinder-foam-seal.html

http://www.parts123.com/corvettecent...50g&ukey=40257

Paul------


Neither of these seals is configured anything like the GM# 3910048. I have several of them around here [none for sale]. If I can get at one, I'll post a photo of it. It's a BIG IF, though, since I dread moving around those heavy group 4 tote bins.

[Paul O.]

Re: seals and gaskets

Joe

I agree not the same but it is the easiest alternative other then a NOS one.