1967 coupe rear window stainless and interior moulding around rear glass - NCRS Discussion Boards

1967 coupe rear window stainless and interior moulding around rear glass

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Michael A.
    Frequent User
    • June 30, 1986
    • 68

    1967 coupe rear window stainless and interior moulding around rear glass

    Hi All,
    Been sometime since I posted on the site. Just purchase a 67 coupe to drive and it seems to have some loose trim inner and outer on the rear window. Never had any issues like that on my old coupe. Thought I would ask for some advice before removing and trying to figure out how to tighten it up. Would appreciate any help I could get with this issue. Please tell me where to look or give me a call with advice.
    Thanks Mike (317)729-2418 fleagle14@embarqmail.com
  • Keith B.
    Extremely Frequent Poster
    • September 15, 2014
    • 1583

    #2
    Re: 1967 coupe rear window stainless and interior moulding around rear glass

    I would think if you can't tighten down the screws then the fiberglass behind the trim the screw holes are striped out. There are many ways to fix them. I like to fill the holes in with epoxy. Let it dry the drill a small piolt hole and then you can tighten down the proper screw

    Comment

    Working...
    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"