63 hard top details
Guys I am looking for the details on a making a 64 hard top to a 63 hardtop, when did the hardtop have one and two rear window supports? and the lower notch cut out. my car is a Mid March car. thanks Ed
-
New England chapter member, 63 Convert. 327/340- Chapter/Regional/national Top Flight, 72 coupe- chapter and regional Top Flight. -
Re: 63 hard top details
1963-1964 Corvette Technical Information Manual & Judging Guide
Auxiliary Hardtop, Option C07 (if equipped)
Revised Text Proposed:
The Auxiliary Hardtop for 1963-1964 models had three distinct designs.
Design One: At the startup of 1963 production the auxiliary hardtop had a notch cut in the bottom, each side, to give greater clearance above the door. This design was present until approximately March 1963.
Design Two: For cars built in approximately April, May and June 1963 the notch in the auxiliary hardtop is not present.
Design three: For cars built approximately near the end of June 1963 until the end of 1963 production and all 1964 production the notch in the auxiliary hardtop is not present and rear window reinforcing brackets are present at the upper center and lower center of the rear Plexiglas.
Comment