Is Re-stamping OK?

[Mark D.]

I have a 1966 283 ci base motor coupe. I would like to convert it into a 427/435 (and add sidepipes) and then sell it. Who is best at doing this so it will be undetectable? Depending on how much I can sell it for, I may or may not tell the buyer.

Although I want the lines on the pad to look just right, I probably won't let an inspector use one of those telescopes.

BTW...who makes the best paperwork?

If none of you rubes have the answer, I'll ask on the Corvette Forum.

Have a nice day,

Anonymous

[Michael J.]

Re: Is Re-stamping OK?

This is a poor attempt at a joke, right?

[Bob J.]

Re: Is Re-stamping OK?

Busy day at the bus terminal?

Don't be cheap.......make it FI and park it in a barn if you want the big $$$ return.

Send pics when you're done ............. with a blue ribbon.

JMB

[Joe R.]

Re: Is Re-stamping OK?

Is stamping OK? Sure it is! 95% of the 1967 435HP's have been re-stamped haven't they? I inspected one the other day that was a 435 1967 with an original window sticker. Owner said it was an original big tank! Rare car as it had a small block front end super glued on! He gave 95K and needed it restored. Bargain don't you say?

JR

[Patrick H.]

Re: Is Re-stamping OK?

I have a 1966 283 ci base motor coupe.

I'd sell that car to a guy on Long Island who seems to dig 1-of-Zero cars like that.
Worth a million bucks, easy.

[Kevin G.]

Re: Is Re-stamping OK?

I have a 1966 283 ci base motor coupe. I would like to convert it into a 427/435 (and add sidepipes) and then sell it. Who is best at doing this so it will be undetectable? Depending on how much I can sell it for, I may or may not tell the buyer.

Although I want the lines on the pad to look just right, I probably won't let an inspector use one of those telescopes.

BTW...who makes the best paperwork?

If none of you rubes have the answer, I'll ask on the Corvette Forum.

Have a nice day,

Anonymous

Just leave it to your heirs and tell them nothing, you're golden....

[Edward J.]

Re: Is Re-stamping OK?

I have a 1966 283 ci base motor coupe. I would like to convert it into a 427/435 (and add sidepipes) and then sell it. Who is best at doing this so it will be undetectable? Depending on how much I can sell it for, I may or may not tell the buyer.

Although I want the lines on the pad to look just right, I probably won't let an inspector use one of those telescopes.

BTW...who makes the best paperwork?

If none of you rubes have the answer, I'll ask on the Corvette Forum.

Have a nice day,

Anonymous

Mark, I am pretty sure there's room for one more, As I have been counting them. and if you go to Staples there printing dept. can make you all the doc.'s you want.

[Michael W.]

Re: Is Re-stamping OK?

This is a poor attempt at a joke, right?

I think it's a pretty good attempt at it. Not good enough to suggest he gives up his day job though. Speaking of that- Hey Mark! Have they replaced assistant plane drivers with dogs yet? You know, the ones that bite your fingers if you attempt to touch any of the knobs and dials?

[Mark D.]

Re: Is Re-stamping OK?

[Mike E.]

Re: Is Re-stamping OK?

Come on, Mark! Man up and put the full vin of the car in your question! And by the way, this thread is worthless without pictures.

[Mark D.]

Re: Is Re-stamping OK?

Come on, Mark! Man up and put the full vin of the car in your question! And by the way, this thread is worthless without pictures.

I'm not going to give out that info but, it is located at my house...

[Bob W.]

Re: Is Re-stamping OK?

How much for the house and the car lets make a deal.

[Steve B.]

Re: Is Re-stamping OK?

I think it's a great attempt at humor

[Brian M.]

Re: Is Re-stamping OK?

Can I ride the bus with a day old ticket?

[Michael J.]

Re: Is Re-stamping OK?

I think it's a great attempt at humor

Hmmmmm...must be an insider, crony kinda thing........