Voltage Regulator Restoration - 1962 - NCRS Discussion Boards

Voltage Regulator Restoration - 1962

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dino L.
    Very Frequent User
    • January 31, 1996
    • 694

    Voltage Regulator Restoration - 1962

    I called John Pirkle Jr and found a message that he is reorganizing his business and not accepting orders....Could you recommend others who can top flight restore an original horn relay and voltage regulator both cosmetically and functionally, your recommendations are much appreciated.
    Attached Files
    Dino Lanno
  • Dino L.
    Very Frequent User
    • January 31, 1996
    • 694

    #2
    Re: Voltage Regulator Restoration - 1962

    I am surprised that there is no one recommending rebuild/ restore businesses on these regulators ? I have received a note from Corvette Central that they do it in house. Any experience with them?
    Dino Lanno

    Comment

    • Rick A.
      Extremely Frequent Poster
      • July 31, 2002
      • 2147

      #3
      Re: Voltage Regulator Restoration - 1962

      check with Ken Bruno - advertises in the Driveline
      Rick Aleshire
      2016 Ebony C7R Z06 "ROSA"

      Comment

      • John S.
        Very Frequent User
        • September 30, 1997
        • 263

        #4
        Re: Voltage Regulator Restoration - 1962

        Ken Bruno doesn't restore voltage regulators or horn relays. Does anyone have any other sources?

        Comment

        • Frank D.
          Expired
          • December 26, 2007
          • 2703

          #5
          Re: Voltage Regulator Restoration - 1962

          I know NOTHING about these guys, just stumbled across them...worth a phone call:

          Most late model alternators have solid state electronic regulators that are integrated into the unit.  Typically, these alternator/regulator systems are replaced as a unit.  It is usually not cost effective Read More


          They claim they will restore your numbers matching, generator (e.g. vibrating points), voltage regulator...

          Comment

          • John S.
            Very Frequent User
            • September 30, 1997
            • 263

            #6
            Re: Voltage Regulator Restoration - 1962

            Originally posted by Frank Dreano (48332)
            I know NOTHING about these guys, just stumbled across them...worth a phone call:

            Most late model alternators have solid state electronic regulators that are integrated into the unit.  Typically, these alternator/regulator systems are replaced as a unit.  It is usually not cost effective Read More


            They claim they will restore your numbers matching, generator (e.g. vibrating points), voltage regulator...


            Thank you Frank for the recommendation. I'll check them out.

            Comment

            • Rick A.
              Extremely Frequent Poster
              • July 31, 2002
              • 2147

              #7
              Re: Voltage Regulator Restoration - 1962

              Check with Bill Caldwell - know he used to do restorations, and believe he advertises in the Driveline
              Rick Aleshire
              2016 Ebony C7R Z06 "ROSA"

              Comment

              • John S.
                Very Frequent User
                • September 30, 1997
                • 263

                #8
                Re: Voltage Regulator Restoration - 1962

                Originally posted by Rick Aleshire (38392)
                Check with Bill Caldwell - know he used to do restorations, and believe he advertises in the Driveline

                Ken Bruno recommended Bill Caldwell, but Bill takes your original case and installs new solid state internal circuitry. I have nice original functioning parts and would like to just get them restored. I'll keep this option in mind if no other reliable sources come up. Thanks for the recommendation.

                Comment

                • Leif A.
                  Extremely Frequent Poster
                  • August 31, 1997
                  • 3614

                  #9
                  Re: Voltage Regulator Restoration - 1962

                  Originally posted by John Sieczkos (29744)
                  Ken Bruno recommended Bill Caldwell, but Bill takes your original case and installs new solid state internal circuitry. I have nice original functioning parts and would like to just get them restored. I'll keep this option in mind if no other reliable sources come up. Thanks for the recommendation.
                  I knew he did this with alternator voltage regulators but wasn't aware he, or anyone else, was doing this with generator voltage regulators. The generator crowd will be pleased to hear this...if true.
                  Leif
                  '67 Coupe L79, M21, C60, N14, N40, J50, A31, U69, A01, QB1
                  Top Flight 2017 Lone Star Regional

                  Comment

                  • Frank D.
                    Expired
                    • December 26, 2007
                    • 2703

                    #10
                    Re: Voltage Regulator Restoration - 1962

                    I seriously doubt this person does generator powered V/R solid state conversions -- the only person that did them was Bob Jeffers of Wilton Electronics.

                    I have the first one he converted for a Corvette in my '61 (in picture below)...I worked with him for several weeks to develop the prototype and then the smarter folks started snapping them up (like Tom Parsons on here). Bob was 92 at the time and passed away a couple of years back and his kids could care less about his work nor passing it on to someone to carry on (I tried -- twice)...

                    I sold my last spare conversion a month ago to a CF friend... The one in the car has worked flawlessly for 1/2 decade now...
                    Attached Files

                    Comment

                    • John S.
                      Very Frequent User
                      • September 30, 1997
                      • 263

                      #11
                      Re: Voltage Regulator Restoration - 1962

                      I left a message on Bill Caldwell's phone and when he calls back we can get the answers to our questions.

                      Comment

                      • John S.
                        Very Frequent User
                        • September 30, 1997
                        • 263

                        #12
                        Re: Voltage Regulator Restoration - 1962

                        Does anyone have any experience with Precision Power inc. in Lansing,MI ? On their web site they state that they restore Voltage Regulators and Relays.

                        Precision Power is your number one source for vintage auto electrical restoration and repair, quality USA remanufactured automotive electrial units, and low production prototyping.
                        Last edited by John S.; August 5, 2016, 04:36 PM. Reason: Added city and state.

                        Comment

                        • Bob W.
                          Very Frequent User
                          • November 30, 1977
                          • 802

                          #13
                          Re: Voltage Regulator Restoration - 1962

                          John Please keep us posted on what you find out about Bill and precision.

                          Bob

                          Comment

                          • Daniel S.
                            Very Frequent User
                            • January 13, 2011
                            • 307

                            #14
                            Re: Voltage Regulator Restoration - 1962

                            Hi Guys, I can do the restorations. Send me a PM and I'd be happy to help.

                            Thanks,
                            Dan

                            Comment

                            • Leif A.
                              Extremely Frequent Poster
                              • August 31, 1997
                              • 3614

                              #15
                              Re: Voltage Regulator Restoration - 1962

                              Originally posted by Daniel Schutzbank (52694)
                              Hi Guys, I can do the restorations. Send me a PM and I'd be happy to help.

                              Thanks,
                              Dan
                              How about the solid state conversions on a generator voltage regulator??
                              Leif
                              '67 Coupe L79, M21, C60, N14, N40, J50, A31, U69, A01, QB1
                              Top Flight 2017 Lone Star Regional

                              Comment

                              Working...
                              Searching...Please wait.
                              An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                              Please push the back button and reload the previous window.'
                              An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                              Please push the back button and reload the previous window.'
                              An internal error has occurred and the module cannot be displayed.
                              There are no results that meet this criteria.
                              Search Result for "|||"