Early 63 radio knob bezel

[John F.]

Can someone post a picture of what their 63 radio knobs look like? The heater bezels have an integrated/one piece bezel with a silver backing fixed bezel if that makes sense. I'm trying to determine if the hex nut showing is correct. Doesn't look right but I haven't been able to find a standalone round silver bezel in any of the catelogs.

[Frank D.]

Re: Early 63 radio knob bezel

Can someone post a picture of what their 63 radio knobs look like? The heater bezels have an integrated/one piece bezel with a silver backing fixed bezel if that makes sense. I'm trying to determine if the hex nut showing is correct. Doesn't look right but I haven't been able to find a standalone round silver bezel in any of the catelogs.

I'm not sure what you want - here are my heater knobs and here are my radio knobs..
A little fuzzy but the best I have right now...

[John F.]

Re: Early 63 radio knob bezel

Frank, thank you again!

I'm good with the heater knobs. Mine are exact. it's the radio knobs I'm questioning. Can you snap an angled photo? I'm trying to figure out the piece that goes between the black label that rests directly against the dash and the knob itself. I guess you'd call it the silver bezel knob or spacer. I see on yours that it has notch that sticks out on the round circumference of the silver bezel. How does that spacer attach? I believe the knob itself just pushes on.

[David L.]

Re: Early 63 radio knob bezel

Enclosed are photos of 1963 Corvette radio knobs, GM # 7277055. The 1963 passenger cars used the same knobs.

Dave

[Bob J.]

Re: Early 63 radio knob bezel

How does that spacer attach? I believe the knob itself just pushes on.

The spacer just slides on the radio shaft and the knobs hold them in place.

[Edward J.]

Re: Early 63 radio knob bezel

One of the spacers is a tone knob control, so it's slotted.

[Frank D.]

Re: Early 63 radio knob bezel

One of the spacers is a tone knob control, so it's slotted.

All of the above is correct. My car is in the paint shop so the pics I shared are all I have right now..

[John F.]

Re: Early 63 radio knob bezel

The spacer just slides on the radio shaft and the knobs hold them in place.

thanks Bob, that's what I needed to know.

thanks everyone!