66 327 starter questions - NCRS Discussion Boards

66 327 starter questions

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Brian K.
    Expired
    • May 31, 2004
    • 358

    66 327 starter questions

    I installed my starter today and have a few questions, this is for a 1966 327 L79 car. In this picture do either of these 2 nuts look correct for the starter brace to starter?

    MVC-002S.JPG

    Okay, should the solenoid shield be painted semi gloss black or natural?

    MVC-003S.JPG

    Last does the small block use a wire clip that attaches to the solenoid to hold the starter wires? My 67 Camaro 350/295HP does or do only the 427 Vett's use this.
  • Joe R.
    Extremely Frequent Poster
    • July 31, 1976
    • 4549

    #2
    Re: 66 327 starter questions

    The nut on the left looks correct to install the brace to the starter.
    The shield should be gloss black as its a dipped part. Actually it could range from gloss black to flat black depending on the age of the paint in the vat and humidity.
    No there is no clip on the solenoid to hold the wires.

    JR

    Comment

    • Brian K.
      Expired
      • May 31, 2004
      • 358

      #3
      Re: 66 327 starter questions

      Thanks Joe!!! You made this easy for me.

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"