63 SWC Interior Question... - NCRS Discussion Boards

63 SWC Interior Question...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Sebastian S.
    Infrequent User
    • November 19, 2015
    • 22

    63 SWC Interior Question...

    My wife and I are visiting family in Florida and while here was planning a trip to Ecklers for a few small items. I don't have my reference manual so I thought it best to ask.

    Interior door knobs mine are currently chrome but from what I've been able to decifer they should be black for an early build car (Nov 62)?

    Door pinch welts I don't recall seeing any type of chrome cap but Ecklers is showing a cap on both sides which are mounted with two screws any thoughts?

    Thx in advance...
  • Mike M.
    NCRS Past President
    • May 31, 1974
    • 8376

    #2
    Re: 63 SWC Interior Question...

    both door pull knobs and shifter knob should be black plastic, not chrome. pinch-welt caps are also needed.they will be stainless for a roadster, and painted interior color for a coupe. mike

    Comment

    • Peter H.
      Very Frequent User
      • April 1, 1980
      • 224

      #3
      Re: 63 SWC Interior Question...

      Mike i really hate to question the pinch welt caps..coupes were chrome with one screw hole or two depending on build date. Right ? Appolozies in advance ...peter ...

      Comment

      • Mike M.
        NCRS Past President
        • May 31, 1974
        • 8376

        #4
        Re: 63 SWC Interior Question...

        Pete: u are correct. i'm getting too senile to be posting without prior research. sorry. mike

        Comment

        • Sebastian S.
          Infrequent User
          • November 19, 2015
          • 22

          #5
          Re: 63 SWC Interior Question...

          Thx so much for the quick replies. Mike would you be able to tell me if the welt caps would be a two hole for a Nov 62 build or one hole. The only ones that I've seen are two hole...

          Thx again.

          Comment

          • Hank D.
            Very Frequent User
            • January 1, 1999
            • 137

            #6
            Re: 63 SWC Interior Question...

            I believe the 2-hole stainless pinch welt cap would be TFP for a coupe built November 62. The 1-hole stainless would have been later in production (May 63?). All 64 through 67 coups pinch welt caps would have been metal that was color matched to the interior with a centerline break for body color.

            Comment

            • Frank D.
              Expired
              • December 27, 2007
              • 2703

              #7
              Re: 63 SWC Interior Question...

              My May 29th '63 coupe has the two hole pinch weld caps.
              To the OP: Eckler's moved their location from years past....make sure you have the right address....they are in the boonies.
              When you think you are lost and there is nothing but woods in sight and you are thinking of turning around -- don't; you're within a 1/2 mile or so...
              Last edited by Frank D.; March 24, 2016, 03:59 PM.

              Comment

              • Robert B.
                Very Frequent User
                • March 1, 1992
                • 265

                #8
                Re: 63 SWC Interior Question...

                my 63 coupe mid nov. has 2 holes.not sure if they are S.S. or plated,as I did not check on that.

                Comment

                • Joe R.
                  Extremely Frequent Poster
                  • July 31, 1976
                  • 4550

                  #9
                  Re: 63 SWC Interior Question...

                  Stainless Steel

                  8,XXX, 10,XXX, 14,XXX, 18,XXX all two hole

                  JR

                  Comment

                  • John D.
                    Extremely Frequent Poster
                    • December 1, 1979
                    • 5507

                    #10
                    Re: 63 SWC Interior Question...

                    My 63, the LWC is early March and has Stainless Steel. JD

                    Comment

                    • Paul Y.
                      Very Frequent User
                      • September 30, 1982
                      • 570

                      #11
                      Re: 63 SWC Interior Question...

                      My June 7th car is 2 hole and stainless steel. I don't recall ever seeing a one hole but that doesn't mean they aren't there.
                      It's a good life!














                      Comment

                      • Richard M.
                        Super Moderator
                        • August 31, 1988
                        • 11318

                        #12
                        Re: 63 SWC Interior Question...

                        John D?

                        What's a LWC?

                        Rich

                        Comment

                        Working...
                        Searching...Please wait.
                        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                        Please push the back button and reload the previous window.'
                        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                        Please push the back button and reload the previous window.'
                        An internal error has occurred and the module cannot be displayed.
                        There are no results that meet this criteria.
                        Search Result for "|||"