neat tools, an improvement over craftsman and snap-on - NCRS Discussion Boards

neat tools, an improvement over craftsman and snap-on

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mike M.
    NCRS Past President
    • May 31, 1974
    • 8381

    neat tools, an improvement over craftsman and snap-on

    Klein tools self-holding screwdrivers, part # 32216 for #2 phillips and # 32215 for slotted screw self holding screwdriver. Klein tools are famous among electricians. these screwdrivers can be had on ebay for about 10 bucks each. mike
  • Larry M.
    Extremely Frequent Poster
    • January 1, 1992
    • 2688

    #2
    Re: neat tools, an improvement over craftsman and snap-on

    Originally posted by Mike McCagh (14)
    Klein tools self-holding screwdrivers, part # 32216 for #2 phillips and # 32215 for slotted screw self holding screwdriver. Klein tools are famous among electricians. these screwdrivers can be had on ebay for about 10 bucks each. mike
    Mike:

    Good info............

    However, being old and slow, I just use the separate screw starters (slotted and phillips) and then follow-up with the screwdriver. Been working okay like this for over 50 years, but it is good to know that better tools are available for those that need them.

    Thanks. Larry

    Comment

    • Joe R.
      Extremely Frequent Poster
      • May 31, 2006
      • 1822

      #3
      Re: neat tools, an improvement over craftsman and snap-on

      Hi Mike,

      Thanks for the tip!!! I did a quick Google search and for that they are also available at your friendly local Home Depot and elsewhere for even less. I think I'll pick up one of each. I also have some magnetic bits for my drill / driver that are a God send, but I don't remember where I got them.

      Joe

      Comment

      • Dan P.
        Very Frequent User
        • December 1, 1990
        • 683

        #4
        Re: neat tools, an improvement over craftsman and snap-on

        Bought both . Thanks Mike they work great

        Comment

        • Stephen B.
          Very Frequent User
          • April 1, 1988
          • 876

          #5
          Re: neat tools, an improvement over craftsman and snap-on

          Thanks Mike

          Comment

          Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"