C-3 hood clearance situation situation ! - NCRS Discussion Boards

C-3 hood clearance situation situation !

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rey S.
    Expired
    • April 1, 1995
    • 277

    C-3 hood clearance situation situation !

    I am intending to mount a oil (trans) cooler in front of the AC condenser in my 72. My cooler is 5" x 6.5" and 3" out from the condenser. My question is will the cooler clear the underside of the hood when open? How for down does the middle of the hood protrude when open? I ask this as I don't have a hood as of yet to take my own measurements.
    Thanks.
  • Russ S.
    Extremely Frequent Poster
    • April 30, 1982
    • 2162

    #2
    Re: C-3 hood clearance situation situation !

    I don't know if this will help as the measurement comes from a 73. With the hood open there is eight inches to the bottom of the radiator support.

    Comment

    • Rey S.
      Expired
      • April 1, 1995
      • 277

      #3
      Re: C-3 hood clearance situation situation !

      Thanks Russ, this adds a piece to my hood puzzle.

      Comment

      • Mark E.
        Extremely Frequent Poster
        • April 1, 1993
        • 4540

        #4
        Re: C-3 hood clearance situation situation !

        Consider mounting the oil cooler on the backside of the radiator. Because of the slope of the radiator, there is a lot of clearance between the radiator and fan near the bottom. As a bonus, the cooler won't be as visible either.
        Mark Edmondson
        Dallas, Texas
        Texas Chapter

        1970 Coupe, Donnybrooke Green, Light Saddle LS5 M20 A31 C60 G81 N37 N40 UA6 U79
        1993 Coupe, 40th Anniversary, 6-speed, PEG 1, FX3, CD, Bronze Top

        Comment

        • Rey S.
          Expired
          • April 1, 1995
          • 277

          #5
          Re: C-3 hood clearance situation situation !

          Hi Mark -- Excellent suggestion for a "stock vehicle". But no can do as I have twin electric fans on the backside of the radiator.
          Thanks for the suggestion any how.

          Comment

          Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"