Who sale the metal A6 a/c compressor pulley cover? - NCRS Discussion Boards

Who sale the metal A6 a/c compressor pulley cover?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Charles B.
    Expired
    • July 20, 2015
    • 4

    Who sale the metal A6 a/c compressor pulley cover?

    I am trying to located the aftermarket or factory if GM made such an idem metal cover that goes over the front pulley on a A6 compressor. I would like to keep as much
    oil leaking past the front seal ending up on the bottom side of the hood. I have been told the oil will eventually penetrate the fiberglass and cause the paint to bubble on top of the hood.
  • Mark E.
    Extremely Frequent Poster
    • March 31, 1993
    • 4503

    #2
    Re: Who sale the metal A6 a/c compressor pulley cover?

    Eckler's sells them.

    I don't think any A6-era Corvettes had these from the factory, but I could be wrong.

    I do know my mom's '75 Cutlass 260 V8 had a factory installed shield...
    Mark Edmondson
    Dallas, Texas
    Texas Chapter

    1970 Coupe, Donnybrooke Green, Light Saddle LS5 M20 A31 C60 G81 N37 N40 UA6 U79
    1993 Coupe, 40th Anniversary, 6-speed, PEG 1, FX3, CD, Bronze Top

    Comment

    • Mark E.
      Extremely Frequent Poster
      • March 31, 1993
      • 4503

      #3
      Re: Who sale the metal A6 a/c compressor pulley cover?

      I was thinking about if you really need a shield...

      How much do you drive your '65? And what portion of these miles do you have the AC on? If your compressor throws enough oil in those few miles to make a mess, you should probably repair it.
      Mark Edmondson
      Dallas, Texas
      Texas Chapter

      1970 Coupe, Donnybrooke Green, Light Saddle LS5 M20 A31 C60 G81 N37 N40 UA6 U79
      1993 Coupe, 40th Anniversary, 6-speed, PEG 1, FX3, CD, Bronze Top

      Comment

      • Harry S.
        Extremely Frequent Poster
        • July 31, 2002
        • 5273

        #4
        Re: Who sale the metal A6 a/c compressor pulley cover?

        I have one on my 63. It is there to avoid the oil hitting the hood. Once it gets into the fiberglass it will weep towards the paint and start to bubble. The only fix is to replace the hood.


        Comment

        • Jim S.
          Extremely Frequent Poster
          • February 28, 1986
          • 1392

          #5
          Re: Who sale the metal A6 a/c compressor pulley cover?

          Charles ,

          Here you go . Picture and Part number compliments of Leif Anderson , who told me how to get mine .

          Rick's Camaro Parts . As Mark said, they are a division of Ecklers.

          Camaro Air Conditioning Compressor Pulley Shield,1967-1968




          Part #:
          33-282080-1
          AC-60
          Price: $39.99 ea.
          Jim

          Comment

          • Jim T.
            Expired
            • February 28, 1993
            • 5351

            #6
            Re: Who sale the metal A6 a/c compressor pulley cover?

            Charles I made my own shield for my 1970. Started with two metal straps of metal, drilled a hole in each to mount to the compressor. After bending drilled two holes in each mounting strap large enough to rivet a cut piece of aluminum flashing to the straps. Painted it and have been using it for many many years with no problems.

            Comment

            Working...
            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"