1970 Headlight Wiring Harness Ground Wire - NCRS Discussion Boards

1970 Headlight Wiring Harness Ground Wire

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Clark E.
    Very Frequent User
    • March 1, 1991
    • 163

    1970 Headlight Wiring Harness Ground Wire

    Where does the ground wire attach to the car? Thanks...Clark
  • Mark E.
    Extremely Frequent Poster
    • April 1, 1993
    • 4542

    #2
    Re: 1970 Headlight Wiring Harness Ground Wire

    There's a ground wire bolted to the driver's side of the core support, on the surface facing forward, mid-way between top and bottom. It's a dedicated self taping bolt; you should see the hole if you have the original core support.

    Page 12-A6 of AIM shows the lead but doesn't really show where it attaches.

    If you really need it, I can take a photo of my car's ground.
    Mark Edmondson
    Dallas, Texas
    Texas Chapter

    1970 Coupe, Donnybrooke Green, Light Saddle LS5 M20 A31 C60 G81 N37 N40 UA6 U79
    1993 Coupe, 40th Anniversary, 6-speed, PEG 1, FX3, CD, Bronze Top

    Comment

    • Clark E.
      Very Frequent User
      • March 1, 1991
      • 163

      #3
      Re: 1970 Headlight Wiring Harness Ground Wire

      Thanks Mark. The core support is original. I checked and located the hole. The self-tapping bolt is still in place waiting for me to attach the ground wire. When I started the frame- off four years ago, I took notes but missed this detail when I removed the original harness. Great to have the car running again. Just a few more details to complete. Appreciate you prompt response...Clark

      Comment

      • Mark E.
        Extremely Frequent Poster
        • April 1, 1993
        • 4542

        #4
        Re: 1970 Headlight Wiring Harness Ground Wire

        You're welcome. Post some photos; I'm sure folks would like to see the car.
        Mark Edmondson
        Dallas, Texas
        Texas Chapter

        1970 Coupe, Donnybrooke Green, Light Saddle LS5 M20 A31 C60 G81 N37 N40 UA6 U79
        1993 Coupe, 40th Anniversary, 6-speed, PEG 1, FX3, CD, Bronze Top

        Comment

        Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"