1979 Sunvisor Rods - NCRS Discussion Boards

1979 Sunvisor Rods

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Schanen C.
    Expired
    • February 1, 2010
    • 122

    1979 Sunvisor Rods

    Hi All,

    Is it Possible that 79s has 2 different lengths of the Sunvisor Rods ????

    What is correct for mine to long ones or the shorter ????

    i have 2 sets Original Rods i will send them to rechrome it.

    I have NO TELESCOPING

    But before i rechrome them , i like to know wich length is Correct.

    Thanks

    Rgds.

    Carlo
  • Joe L.
    Beyond Control Poster
    • February 1, 1988
    • 43220

    #2
    Re: 1979 Sunvisor Rods

    Originally posted by Schanen Carlo (51311)
    Hi All,

    Is it Possible that 79s has 2 different lengths of the Sunvisor Rods ????

    What is correct for mine to long ones or the shorter ????

    i have 2 sets Original Rods i will send them to rechrome it.

    I have NO TELESCOPING

    But before i rechrome them , i like to know wich length is Correct.

    Thanks

    Rgds.

    Carlo

    Carlo------


    There were 2 different designs for the sunshades for 1979 Corvettes. The 1st design was non-telescoping. The 2nd design was telescoping. Apparently, you have the 1st design. The supports (rods) for these sunshades were never available separately in SERVICE but were available only as an integral part of the sunshade assembly and I have no personal experience with these sunshades. Thus, I have no idea which supports are applicable to your early application. If I were to guess, I would say the short ones but that's just a guess. Maybe someone else will have better information.
    In Appreciation of John Hinckley

    Comment

    • Schanen C.
      Expired
      • February 1, 2010
      • 122

      #3
      Re: 1979 Sunvisor Rods

      Hi Joe,

      Thanks for Your fast answer

      Yes , I think i will install the short ones.

      Carlo

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"