65 P/S pulley 3868892

[Bryan H.]

I want to thank everyone for helping me avoid a mistake in application. I was originally understanding that a cast iron vpulley was used with 65 350HP A/C P/S I now know it was a stamped steel #3868892 . Joe Lucia pointed this out.
Is #3868892 available? Bryan Hepper

[Joe L.]

Re: 65 P/S pulley 3868892

I want to thank everyone for helping me avoid a mistake in application. I was originally understanding that a cast iron vpulley was used with 65 350HP A/C P/S I now know it was a stamped steel #3868892 . Joe Lucia pointed this out.
Is #3868892 available? Bryan Hepper

Bryan------

I don't know if the GM #3868892 is available in reproduction, or not. If it is, the reproduction source will be Paul Baker of Goat Hill Classics in Long Beach, CA.

The 3868892 is certainly not still available from GM as it was discontinued without supercession in 1976. It had very limited application so it's hard to find.

Below are photos of the 3868892, some showing it with the far more common GM #3770509.


DSCN2106.jpgDSCN2108.jpgDSCN2110.jpgDSCN2111.jpg

[Joe L.]

Re: 65 P/S pulley 3868892

More photos:



DSCN2112.jpgDSCN2113.jpgDSCN2114.jpgDSCN2117.jpg

[Bryan H.]

Re: 65 P/S pulley 3868892

Thanks for your help Joe. reading thru these tech discussions over the last 10years you are a wealth of knowledge. I am not schmoozing you either,
thanks agin