s/b carb studs with indent/dimple on them

[Charles M.]

Trying to bring my 65 coupe 327/365 up to NCRS top flight specs, looking for the carb studs with the correct indent/dimple on them, looking for 4, thanks for any input / info on this
Chalie M

[Gene M.]

Re: s/b carb studs with indent/dimple on them

You should try junk yards for other GM cars, the studs are not unique to Corvettes.

[Charles M.]

Re: s/b carb studs with indent/dimple on them

Gene, thanks I thought about that also, do we know what the correct length would be

[Joe L.]

Re: s/b carb studs with indent/dimple on them

Gene, thanks I thought about that also, do we know what the correct length would be

Charles-------


I believe they are 1-9/16" overall length.

[Gary B.]

Re: s/b carb studs with indent/dimple on them

Try AMK Products. There number B-11006

http://www.amkproducts.com/bulk3.asp?part=B-11006

Gary

[David L.]

Re: s/b carb studs with indent/dimple on them

Here are photos of carb studs. One photo of over the counter GM suds and the other 4 photos of used studs from intakes that I once owned:

Dave

[David L.]

Re: s/b carb studs with indent/dimple on them

My 1965 Chevrolet Parts Catalog (May 1965) lists GM # 3836527 as the part number in Gr. 3.288 for intake to carburetor studs for 55-58 and 59-65 ALL, CORVETTE (8 cyl.) (exc. H.L. Cam, closed vent) with the following description: 5/16-18-24 X 1 9/16).

As Joe stated, the AMK Product B-11006 studs seem to be correct ( 5/16" X 1.53", 0.50" UNC & 0.80" UNF) for your car.

The studs from my 1970 intake (1.64" long) seem to be GM # 3959570 (5/16"-18-24 X 1 11/16") as shown in my 1970 Chevrolet Parts Catalog (Oct. 1970).

Dave

[Charles M.]

Re: s/b carb studs with indent/dimple on them

I appreciate all the info (this forum still seems to amaze me by the info/pics we have on things like carb studs), do we know if they have the correct dimples on them ?
Thanks Again for all the info Forum.....

[David L.]

Re: s/b carb studs with indent/dimple on them

The thread below might help answer your question about the dimples.

Dave

https://www.forums.ncrs.org/showthread.php?90694-Midyear-small-block-Carburetor-to-Intake-Manifold-studs-Are-these-originals&highlight=3836527+stud