C2 Hood Support Upper Screw 9409107

[Larry M.]

Pete Lindahl in a 2006 post by Alan Drake gave the following description.

p/n 9409107 is a 1/4-20 x 5/8" zinc plated screw with a 7/16" sunken head, integral lock washer, and flat end.

Does integral lock washer mean toothed/star or split ring?

[Rich P.]

Re: C2 Hood Support Upper Screw 9409107

Split ring

[Larry M.]

Re: C2 Hood Support Upper Screw 9409107

Great, thanks. Corvette Central supplies it that way with an A stamp. Paragon has a toothed with E stamp. Prior posts and the JG say to ignore the AIM and use the support to fender screw for the support to hood. But some folks say their car follows the AIM and that is what I'm planning to do.

[Peter L.]

Re: C2 Hood Support Upper Screw 9409107

Larry - My experience is that both the upper & lower screws attaching the hood support at least on our 66 & 67 Corvettes had the "anchor" head marking. Pete