Expansion Tank and By Pass Clamp Configuration-C2 SHP(64 FI)

[Joe R.]

Re: Expansion Tank and By Pass Clamp Configuration-C2 SHP(64 FI)

Joe, read the thread. Tony's are for the radiator to expansion tank. They are correct; I have the originals replated and four NOS originals for my car, but they are not the subject of this thread. All of the other pics are either from the expansion tank to the Tee or on the water pump bypass, A4 1/2 and A 4 3/4 respectively. The pic in post #4 above is from Bill Mock of an unmolested 64 fuel car. It is an A4 3/4 clamp. The NOS clamps I just bought are EXACTLY like his pic except the screw and the stamping is in the reverse direction (which i think is inconsequential).

Larry,

OK, whatever you think is OK with me. I was just addressing the by pass hose clamp and only read what I want! My bad, I guess!!!!!!!

JR

[Geoff C.]

Re: Expansion Tank and By Pass Clamp Configuration-C2 SHP(64 FI)

"other type is a Whittlock made clamp"

I googled Whittlock clamp & no hits.
I have never head of that term.
Does anyone have a photo?

[Larry M.]

Re: Expansion Tank and By Pass Clamp Configuration-C2 SHP(64 FI)

The A4 3/4 clamp is tough to find but right now the A4 1/2 is available on ebay...just search Vintage A4 1/2 clamp...it will come up. I bought three sets but the guy, Jones Vintage parts says he has about 30 more. But be careful...he sent one of a different configuration but replaced it readily. See attached pic of his original shipment with the odd clamp