1962 frame and driveshaft stencil - NCRS Discussion Boards

1962 frame and driveshaft stencil

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dino L.
    Very Frequent User
    • January 31, 1996
    • 694

    1962 frame and driveshaft stencil

    Can anyone confirm the numbers that should appear on a 1962 built early November 1961? Does anyone have the stencils they can loan me.....I will cover the cost? Thanks Dino
    Dino Lanno
  • Pat H.
    Very Frequent User
    • November 30, 1996
    • 419

    #2
    Re: 1962 frame and driveshaft stencil

    Dino
    I just looked in my 61-62 TIMJG and it doesn't even mention a stencil on the drive shaft,but Ive seem them on these cars. However in the 58-60 TIMJG Section 31 driveshafts & universals indicate a stencil # 3712377 on an unpainted driveshaft which is near the yoke in yellow paint. I believe the drive shafts at least from 58-61 are all the same std or auto transmission, but 62 the auto was aluminum and that may have changed. I think Corvette Central sells them for about $20

    Comment

    • Joe R.
      Extremely Frequent Poster
      • July 31, 1976
      • 4549

      #3
      Re: 1962 frame and driveshaft stencil

      Dino,

      Quanta sells stencils for the frame and driveshaft. They are not perfect in every case BUT they are something to brighten up the frame and make it purty!!!!

      JR

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"