70 L46 starter brace and shield attachment

[Bill L.]

Having read the archives I am still a bit confused.

Did the 70 sb starter brace have the hole for the self tapping screw to attach the starter heat shield or just a hole for the small tab?

What does the bolt look like the attaches the brace and shield to the starter?

Thanks,


Bill

[David L.]

Re: 70 L46 starter brace and shield attachment

Bill,

The link below might help you. There were 3 different shields used. I have more photos, if necessary.

Dave

https://www.forums.ncrs.org/showthre...3959552+shield

[Bill L.]

Re: 70 L46 starter brace and shield attachment

Bill,

The link below might help you. There were 3 different shields used. I have more photos, if necessary.

Dave


https://www.forums.ncrs.org/showthre...3959552+shield

Thank you Dave. I just thought there was still some question in terms of when the change took place. Looks like I need a new brace and shield.

Thanks, Bill

[David L.]

Re: 70 L46 starter brace and shield attachment

Bill,

As far as I know the 1970 would use GM # 3959522 (1st design, attached with a self tapping screw) as shown in the photo below (the shield on the top. I still might have one in my collection.

Dave

[Bill L.]

Re: 70 L46 starter brace and shield attachment

Bill,

As far as I know the 1970 would use GM # 3959522 (1st design, attached with a self tapping screw) as shown in the photo below (the shield on the top. I still might have one in my collection.

Dave

Thank you for the pics. Pretty good idea what I need now

Bill