54 shifter handle replacement - NCRS Discussion Boards

54 shifter handle replacement

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jerry H.
    Expired
    • April 22, 2007
    • 8

    54 shifter handle replacement

    I have had the shifter handle off of a 54 Corvette for several years. Upon replacement, I had a threaded stud with a fixed nut and smaller threaded end (for mounting the bell cover). Putting the longer threaded end into the tunnel's hole, it does not seam to want to bottom out or seat (before it seems to be in too far). I can't remember if there was any other parts involved. The shim with the detents for the shifter handle are screwed to the tunnel. The transmission has not been messed with. I have not looked underneath yet. I thought it just threaded in. Thanks for any help, Jerry
    Last edited by Jerry H.; July 23, 2014, 07:09 PM.
  • Gary H.
    Very Frequent User
    • June 30, 1980
    • 155

    #2
    Re: 54 shifter handle replacement

    026-collage66.jpgThis might help!

    Comment

    Working...
    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"