The factory assembly manuals any advise???

[John P.]

I am buying a 69 coupe so I was looking at purchasing the assembly manual and the service manuals..

Which do you guys have and do you recomend them?

Do you fellas have any recommendations as to who to buy these from??

MAD, Zip, corvette america??? anyone in particular or are the manuals basically the same all around?? carbon copies as far as I can tell!

I have seen a few used books on ebay but Im not sure if they are the same as the ones I see in mid America or zip catalogs?

also what is the best book on for the chassis I have seen one that Chevrolet put out that is for sale in the store and I have also seen the chassis restoration guide which should I get???

let me know what you think!
thanks
_______

[Donald L.]

Re: The factory assembly manuals any advise???

Johnny- you are at the right location already, the NCRS store.

[Gary S.]

Re: The factory assembly manuals any advise???

Who to buy them from? Why our very own NCRS store. Look at this site at https://www.ncrs.org/store/shop.cgi/page=index.html

I have the AIM, the Chassis Service Manual and the Chassis Repair manual for my 72. I also like the Vette Vues Fact Book for 1968-72. It is chock full of photos and data that is useful in restoration. I would also buy the 1969-69 Technical Information Manual and Judging Guide. If you still feel like spending then the Corvette Restoration Guide for 1968-82 is also nice.

The more you get into it, the more you will want in your library.

Gary

[John P.]

I found them in the store.......

Well guys I have both of the judging manuals for 69 cars, I also have all the restoation guides by Richard Prince, Richard Newton & Linsay Porter, And I also have the "Original Corvette" by Tom Falconer. Thats just the start of my library for C-3's!! =0)

I guess I cant get any better of a deal for these books than right here huh!

I want to thank you guys I didnt see all of them in the store I guess I looked in the wrong spot but I found them now!

thanks
jp

[Craig S.]

Re: I found them in the store.......

Johnny - anohter great book is the Chevrolet by the numbers series by Alan Colvin for getting your engine components nailed down, and is just a nice reference to have...Craig