'66 dash harness - NCRS Discussion Boards

'66 dash harness

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Chip Levick

    '66 dash harness

    I am in the process of installing the main dash harness (from Lectric Limited) in my '66 roadster. Should I have wires left? My car has AC, but does not have power windows or power antenna. Also, I installed the AC harness (also from Lectric Limited) today and had three wires left that I could not tell where they went; a black (possibly 10 gauge) wire with a round end and a red (possibly 10 gauge) wire with a round end and a smaller black (possibly 14 - 18 gauge) wire. Any ideas?
  • Bill Braun 33186

    #2
    Re: '66 dash harness

    Chip,
    As far as I know, the power windows have a separate pigtail and has to be specifically ordered. Could be wrong, though.

    Comment

    • Bill Clupper

      #3
      Re: '66 dash harness

      When you have A/C. the original heater harness wiring in the IP is not used and is taped back to the harness main.

      Comment

      • David D.
        Very Frequent User
        • April 1, 1990
        • 330

        #4
        Re: '66 dash harness

        Chip, A power antenna was standard in 1966 with the U69 radio option. Dave

        Comment

        Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"