All tapped out !!

[don whitehead]

I have an aluminum bellhousing for a '60 283 and the thread where the clutch fork pivot ball bolts into it is cross threaded. It seems to be a real strange size . It is .810 in. and appears to have 16 threads per inch. Any one have a tap I could borrow for this, or know where I can get one.

[John H.]

Re: All tapped out !!

Don -

Could be a challenge finding a tap or a Helicoil for that one - it's 13/16"-16.

[John H.]

Re: All tapped out !!

Don -

Could be a challenge finding a tap or a Helicoil for that one - it's 13/16"-16.

[George J.]

Re: All tapped out !!

Don,

Production Tool Supply has the biggest catalog I've seen. Their web site is

http://www.pts-tools.com

[George J.]

Re: All tapped out !!

Don,

Production Tool Supply has the biggest catalog I've seen. Their web site is

http://www.pts-tools.com

[don whitehead]

Re: All tapped out !!

Thx, will look to them,,,Don

[don whitehead]

Re: All tapped out !!

Thx, will look to them,,,Don

[Craig S.]

Re: All tapped out !!

Don - McMaster-Carr is another good choice, see their website below...Craig

[Craig S.]

Re: All tapped out !!

Don - McMaster-Carr is another good choice, see their website below...Craig

[Craig S.]

Re: All tapped out !!

I will try that again for the website!...Craig

http://www.mcmaster.com/

[Craig S.]

Re: All tapped out !!

I will try that again for the website!...Craig

http://www.mcmaster.com/