FLEA BAY 67.

[Richard S.]

Check out the Tank Sticker on this sucker....67 Corvette....for over 200 large......

FLEA BAY ITEM NO: 290201004929.

[Chris L.]

Re: FLEA BAY 67.

Rick..please educate me as to what is wrong with this. I see the window sticker shows a 390 and the tank sticker shows 400. What am I missing here? Thanks

[Anthony S.]

Re: FLEA BAY 67.

Chris,

Look further down on the tank sticker & on the bottom of the window sticker where it reads RPO L-68 Convert 390HP to 400HP.

The 400 HP tri power setup is essentially an "upgrade" from the 390 P L-36.

I could be wrong, but you couldnt get A/C or power brakes with the 435 HP L-71/L-89 motor. If you really wanted the tri-power setup with these options, your only option was the L-68.

Anthony

[Jack W.]

Re: FLEA BAY 67.

there are more than just a few things wrong with that tank sticker . . .

[Kent K.]

Re: FLEA BAY 67.

Anthony,
I have a one previous owner 1969 427/435 with power steering and power brakes. It is true that you could not get A/C with the 435 HP in 1967 thru 1969, but you could order it with the 400 HP engine option.
Kent

[Chris L.]

Re: FLEA BAY 67.

I did see that and thought I had seen that on other 400HP cars tank stickers that were legit. Was a 400HP car listed on the tank sticker as a 390 and then at the bottom the 400HP was added?

[Mike M.]

Re: FLEA BAY 67.

yes. mike

[Tom D.]

Headrest bench seat? Is that legit? *NM*

[Brett H.]

Re: FLEA BAY 67.

Couldn't get 370 HD posi with AC on the L68 either. I used to have one.

Fakes galore!!!!!!!!!!!

[John C.]

Re: Headrest bench seat? Is that legit?

As strange as that might sound it was how headrests were listed on the tank sheet.

[Kenneth B.]

Re: FLEA BAY 67.

The side exaust was the wrong code. I called the dealer & ask how abig block could have small block exaust. He said paperwork came with the car & " I KNOW NOTHING" then he hung up. Did anyone see the body splice on the underside.The front & back 1/2 are not the same body. OH well it's only 200,000

KEN 7808

[Larry M.]

Re: FLEA BAY 67.

Build sheet lists aluminum wheels...no mention of them on the window sticker.

Larry

[Larry M.]

Re: FLEA BAY 67.

From a paint quality standpoint, it appears as if the white stinger stripe on the hood in front of the scoop has a 'wiggle' in it on the way to lining up with the point on the headlamp panel (unless I'm viewing it incorrectly).

Larry

[Page C.]

Re: FLEA BAY 67.

Maybe the back half of the car was a small block and when they spliced the car together they did the same to the tank sticker?
Regards,
Page Campbell