Trim tag date - NCRS Discussion Boards

Trim tag date

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Benjamin C.
    Very Frequent User
    • July 31, 1994
    • 134

    Trim tag date

    My 67 has a build date of 2/24/67. VIN # 11813. My trim tag date is G 24. Is this the same day? Is this even possible? I have good history on the car and there is no indication of the tag being changed. Everyting else on the tag is correct. If the tag was reproduced why would someone put an iffy date on it.
  • Dick W.
    Former NCRS Director Region IV
    • June 30, 1985
    • 10483

    #2
    Re: Trim tag date

    Trim tag letters begin with the first month of production, usually August. If 1967s began that month, the G is correct.
    Dick Whittington

    Comment

    • John S.
      Very Frequent User
      • September 30, 1997
      • 263

      #3
      Re: Trim tag date

      This is possible, if the body on your car is St. Louis built. Look at your trim tag and and check if three is an "S" prefix in your body number.

      Comment

      • John H.
        Beyond Control Poster
        • December 1, 1997
        • 16513

        #4
        Re: Trim tag date

        B.J. -

        Not unusual - if the body hit the first station on the Hard Trim Line (where the trim tag and VIN plate were installed) at the beginning of first shift, it would be off the line before the end of second shift. Note that the "Birthday Book" and various calculators are estimates, usually accurate within a day or two in either direction.

        Comment

        Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"