69 small guage bezel - NCRS Discussion Boards

69 small guage bezel

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Brad S.
    Expired
    • July 31, 2005
    • 227

    69 small guage bezel

    What is the part # for the small guage bezel for a 69? I believe it fits 69-71. I have an unbroken bezel with 6491171-69 cast in the part is this correct? Thanks
  • Joe L.
    Beyond Control Poster
    • February 1, 1988
    • 43229

    #2
    Re: 69 small guage bezel

    Brad------

    The numbers cast on the bezel are not the same as the part number for the finished bezel. If you post a picture of the bezel, myself or someone else might be able to ID it for you.
    In Appreciation of John Hinckley

    Comment

    • Brad S.
      Expired
      • July 31, 2005
      • 227

      #3
      Re: 69 small guage bezel

      Joe, I don't think I can post a picture. Can you try to explain the differances between the 69- 71 and the 72-76.

      Comment

      • Joe L.
        Beyond Control Poster
        • February 1, 1988
        • 43229

        #4
        Re: 69 small guage bezel

        Brad------

        It has to do primarily with the configuration of the upper left portion of the bezel. The 69-71 has a square opening for the seat belt warning light and, below that, a square seat for the seat belt light extinguish push button.

        The 72-76 has a single rectangular opening on the left side which has a single rectangular lens which reads "fasten seat belts"; no pushbutton was used.

        The 1968-only bezel is like 1969-71 EXCEPT that it has a smooth finish rather than the "grained" finish used for 69-71.
        In Appreciation of John Hinckley

        Comment

        • Brad S.
          Expired
          • July 31, 2005
          • 227

          #5
          Thanks Joe *NM*

          Comment

          Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"