Can anyone provide some insight on my transmission and whether it's correct for the car? My Vette was build around July 2nd 1959. The transmission Main Cast is a T10-1B dtd WF1992, Side Cover plate is a 59 Style according to judging manual but I haven't taken the cover off to see the date (assuming it correct) and the tail housing is a T10-7A dtd 3 9 59 M. I've been told that the transmissions are only judged for correct type. Is that correct? Does this transmission pass the test for my car.
-
-
I would say your transmission will pass...
...the test for your car with no problems. -
Re: 1959 C1 Borg Warner Trans
If anyone looks hard enough to see the casting ID, the '59 is a T10-1 case. Yours is a 1961 case.Bill Clupper #618Comment
-
Re: 1959 C1 Borg Warner Trans
Is the case aluminum or iron?
RayRay Carney
1961 Sateen Silver 270-HP
1961 Fawn Beige 315-HPComment
-
Re: 1959 C1 Borg Warner Trans
Thanks Bill,
How can I tell it's a 61 case, It is stamped dtd June 19 1959 2nd shift on the cast iron case itself. I was told that the T10-1B cases ran all the way through late 1959.Comment
-
Re: 1959 C1 Borg Warner Trans
Ray, The case is cast iron. Correct for this year and date.Comment
Comment