'57 Rear Wheel Bearings - NCRS Discussion Boards

'57 Rear Wheel Bearings

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Pierre J.
    Expired
    • July 31, 2000
    • 193

    '57 Rear Wheel Bearings

    I intend to replace the rear wheel bearings in my '57. According to previous postings on this board, I should be using RW307R bearings. My local NAPA dealer tells me that, according to his books, I should be ordering RW607R.
    Im understand the RW307R are .900" wide plus a .100 spacer and the RW607R are a full 1" wide.
    Can I just substitute the RW307R + spacer with a RW607R?

    Thanks
    Pierre
    #34410
  • Terry D.
    Extremely Frequent Poster
    • May 31, 1987
    • 2691

    #2
    Re: '57 Rear Wheel Bearings

    Pierre

    I'm not at home so I don't have my info, but if you go to the Timken web site you can look up the correct number. For what it's worth I would believe this board over the NAPA book.
    Terry

    Comment

    • Gary C.
      Administrator
      • October 1, 1982
      • 17662

      #3
      Re: '57 Rear Wheel Bearings

      Pierre, my '57 3:70 posi had RW607R bearings and no spacer. FWIW, Gary....
      NCRS Texas Chapter
      https://www.ncrstexas.org/

      https://www.facebook.com/profile.php?id=61565408483631

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"