1966 wiper arm shaft weather proofing - NCRS Discussion Boards

1966 wiper arm shaft weather proofing

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Tony C.
    Expired
    • February 29, 2008
    • 117
    #1

    1966 wiper arm shaft weather proofing

    Hi
    What can I use to replace the dried out black weather proofing that is on the mounting plate for the wiper arm shaft in the cowl.
    Thanks Tony
    Tags: None
      • Top
    • Joe C.
      Expired
      • August 31, 1999
      • 4598
      #2
      Re: 1966 wiper arm shaft weather proofing

      Silicone sealant (RTV), or similar. Best stuff to use, at about $18.00/tube, is 3M Urethane windshield adhesive. I would not use the strip sealant (aka "dum-dum") that was factory applied. It dries out and cracks, eventually.
        • Top

        Comment

        Previous template Next
        Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"