'65 515 Horn Relay Question??? - NCRS Discussion Boards

'65 515 Horn Relay Question???

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • James W.
    Extremely Frequent Poster
    • December 1, 1990
    • 2652

    '65 515 Horn Relay Question???

    Hello,

    Can someone tell me if there is a specified "air gap" between the contact and the pole on an original 515 horn relay?

    Any help would be greatly appreciated.

    Thanks,

    James West
  • Wayne M.
    Expired
    • March 1, 1980
    • 6414

    #2
    You must mean 1119515 VOLTAGE Regulator

    and the 1965 Corvette Shop Manual specifications shows air gaps for both field relay and volt reg (0.015" and 0.067", respectively). Point openings are 0.030" and 0.014", respectively.

    Comment

    • James W.
      Extremely Frequent Poster
      • December 1, 1990
      • 2652

      #3
      Re: You must mean 1119515 VOLTAGE Regulator

      Wayne,

      I need the air gap between the contact and pole for the horn relay only, I referenced the voltage regulator part number by mistake.

      James West

      Comment

      • James W.
        Extremely Frequent Poster
        • December 1, 1990
        • 2652

        #4
        Re: Anyone...Bueller...Bueller...Bueller??? *NM*

        Comment

        • Wayne M.
          Expired
          • March 1, 1980
          • 6414

          #5
          Re: Anyone...Bueller...Bueller...Bueller???

          James -- I've been waiting to see who's going to step up, so here's my 2 cents.

          (IMO) GM considered the 1115824 horn relay a non-serviceable (throw-away) item. I have a junkyard example in the basement; I suppose I could pry off the cover and measure the gap, but I'd be afraid of altering that crucial "split" in the seam of the tab.

          Was that a real Ferrari GTS-250 he put in that swimming pool ?

          Comment

          Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"