67 electrical problem - NCRS Discussion Boards

67 electrical problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Walt W.
    Expired
    • November 1, 1998
    • 92

    67 electrical problem

    I removed my clock for repair and now my couretsy and glove box lights don't work. I checked the fuses on inner firewall near clutch pedal and they are all OK. Is there another fuse or breaker to check? Does the clock have to be connected in order for the light to work?

    Thanks

    Walt Weems
  • William C.
    NCRS Past President
    • May 31, 1975
    • 6037

    #2
    Re: 67 electrical problem

    I suspect you disconnected the ground at the clock, try grounding the system, most of the circuits you have listed work on power to the socket, ground via the switch.
    Bill Clupper #618

    Comment

    • John H.
      Beyond Control Poster
      • December 1, 1997
      • 16513

      #3
      Re: 67 electrical problem

      Walt -

      Did you check both ends of the fuse for power? That's a full-time battery circuit, and should show power at all times. Have you checked the orange feeds at the courtesy lights and glove box lights for power? They're directly grounded through the birdcage, and don't depend on the clock for either power or ground.

      Comment

      • Walt W.
        Expired
        • November 1, 1998
        • 92

        #4
        Re: 67 electrical problem

        Thanks to Bill and John for your help. I did recheck the fuses and found a bad one. Replaced it and everything is OK.

        Walt

        Comment

        Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"