Choke Tube Exhaust Manifold C1 - NCRS Discussion Boards

Choke Tube Exhaust Manifold C1

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • John C.
    Expired
    • December 1, 2003
    • 18

    Choke Tube Exhaust Manifold C1

    Installing a new choke tube in exhaust manifold.
    My question is how far out of the top of exhaust manifold
    should it be?
    This is on a 2x4 car.
    Thanks
    John
  • Tom D.
    Extremely Frequent Poster
    • September 30, 1981
    • 2132

    #2
    Re: Choke Tube Exhaust Manifold C1

    Before it turns, you mean?

    Check out Nolan Adams book about the 58-60 Corvettes. Page 123 shows a tube on a 2x4 1960 270 HP. In that photo, it looks like it "turns north" rather quickly. Hope this helps.

    Tom Dingman
    4889
    https://MichiganNCRS.org
    Michigan Chapter
    Tom Dingman

    Comment

    • Art B.
      Expired
      • July 31, 1989
      • 333

      #3
      Re: Choke Tube Exhaust Manifold C1

      John: I think you may be referring to only the tube inside the exhaust manifold. When I replaced mine on my 2x4 '57, I made it flush with the top of the manifold. The heat tube that goes up to the choke fits over this tube. If this is not correct, I'm sure someone more knowlegable will respond.

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"