69 BB AIR pump bracket - NCRS Discussion Boards

69 BB AIR pump bracket

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rob M.
    NCRS IT Developer
    • January 1, 2004
    • 12722

    69 BB AIR pump bracket

    Anyone has an idea where I can purchase a 69 BB air pump bracket (and bolts/nuts)? I can't find these items at CC where I normally purchase my goods...

    greetings,
    Rob.
    Rob.

    NCRS Dutch Chapter Founder & Board Member
    NCRS Software Developer
    C1, C2 and C3 Registry Developer
  • Rob M.
    NCRS IT Developer
    • January 1, 2004
    • 12722

    #2
    Re: 69 BB AIR pump bracket

    If anyone has some good pictures of the AIR setup (including the needed bracket(s)) please don't hesitate to send them to me via rob@itcap.nl

    thanks,
    Rob.
    Rob.

    NCRS Dutch Chapter Founder & Board Member
    NCRS Software Developer
    C1, C2 and C3 Registry Developer

    Comment

    • Joe L.
      Beyond Control Poster
      • February 1, 1988
      • 43203

      #3
      Re: 69 BB AIR pump bracket

      Rob-----

      The 68-74 brackets and brace used to be reproduced. However, I believe that the production run of parts was depleted and the restoration source chose to have no more made. So, that pretty much leaves used as the only source.

      A picture of an original GM bracket is shown below.




      Attached Files
      In Appreciation of John Hinckley

      Comment

      • Mark F.
        Expired
        • January 1, 2003
        • 139

        #4
        Re: 69 BB AIR pump bracket

        Rob

        I purchased one from Bill Hodel. His number is 330-832-0871. He is a very good source for any smog systems. He is in Massillon, Ohio. Pricy, but excellent quality. Of course, give me an example of somthing on these cars that isn't pricy.

        Mark

        Comment

        • Rob M.
          NCRS IT Developer
          • January 1, 2004
          • 12722

          #5
          Re: 69 BB AIR pump bracket

          Thanks, I'll give hiom a call today. I understand there are two brackets needed. One as displayed in the picture above but also one to adjust the tension of the belt (and holding the pump)?

          greetings,
          Rob.
          Rob.

          NCRS Dutch Chapter Founder & Board Member
          NCRS Software Developer
          C1, C2 and C3 Registry Developer

          Comment

          • Rob M.
            NCRS IT Developer
            • January 1, 2004
            • 12722

            #6
            Re: 69 BB AIR pump bracket

            I was able to purchase the needed parts from Bill. He was quite a bit surprised to get an order all the way from Europe though!!!

            thanks all for your help,
            Rob.
            Rob.

            NCRS Dutch Chapter Founder & Board Member
            NCRS Software Developer
            C1, C2 and C3 Registry Developer

            Comment

            Working...
            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"