65 rear blower screen - NCRS Discussion Boards

65 rear blower screen

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rob M.
    Very Frequent User
    • June 30, 1999
    • 171

    65 rear blower screen

    I am trying to figure out how to install the rear blower screen. I have a repo screen from LI and can't figure out how to mount it from the AIM. The car did not have carpet or screen when I got it - so not help there. Does the screen attach with screws or glue to the back of the side carpet board? If anyone has a picture, that would be great.
    Thanks for your help.
    Rob
    My Project Pictures
    http://temp.corvetteforum.net/classics/l78vetteman/
  • Don H.
    Extremely Frequent Poster
    • December 1, 1981
    • 1483

    #2
    Re: 65 rear blower screen

    Rob,
    It has been years since I had it aparts but I am sure it is not glued. Email me and i will get you a picture. Don H.

    Comment

    • Mike M.
      Expired
      • September 30, 1999
      • 710

      #3
      Re: 65 rear blower screen

      Rob, There are 2 screws that attach the card board and carpet to the bracket on the blower motor at the back, The edge of the screen goes behind the carpet board and the screws go through both to hold in place. I have a pic also if you need one. Mike

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"