Clutch type for 60 Vette - NCRS Discussion Boards

Clutch type for 60 Vette

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Bob Simard
    #1

    Clutch type for 60 Vette

    What do you guys recommend as a replacement clutch in a 60 Vette? Borg and Beck type or diaphram? I removed a three finger type and also have the godzilla spring installed. Thanks
    Tags: None
      • Top
    • Dennis A.
      Expired
      • April 30, 1999
      • 1010
      #2
      Re: Clutch type for 60 Vette

      Bob...

      Unless you plan to do something different with your '60, I would install a 3 finger type clutch...the godzilla works with it and a Multi-Finger (10 inch) may require the removal of the Godzilla spring, due to centrifugal force at high R.P.M., the clutch pedal could stay on the floor....this condition occurs in about 5% of applications...Best not to let it happen...
        • Top

        Comment

        • Jim D.
          Extremely Frequent Poster
          • June 30, 1985
          • 2883
          #3
          Re: Clutch type for 60 Vette

          Just installed a diaphram LUK clutch set-up and it works perfectly with my GODZILLA spring. I'd do it again in a heartbeat.
            • Top

            Comment

            Previous template Next
            Working...
            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"