Tonowanda plant exhaust manifold overspray - NCRS Discussion Boards

Tonowanda plant exhaust manifold overspray

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Kevin M.
    Expired
    • November 1, 2000
    • 1271

    #16
    Re: Trying again

    Verne,

    Nce original picture, and yes it is interesting to see the other overspray areas, and limited amount on the exhaust.
    Kevin

    Comment

    • Verne Frantz

      #17
      Photo disclaimer

      Just in case anyone decides to save that photo as an original '62 engine compartment, note the following.
      The owner added underdash gauges, hence the stray red wire for the amp gauge, the fat hose for the vacuum gauge, the capillary for the water temp gauge, and the (hard to see) 1/8" copper tubing for the oil pressure gauge. Also, the 17 year old kid at Tonawanda never put the decals on the left valve cover, and someone broke off the rear tall wire loom by then. Oh, and the owner added markers on the plug wires.
      Other than those items, everything else you can see is legit. Didn't want to mislead anyone, even though that photo isn't of much interest here. Just trying to be clear.

      Verne

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"