C2 Power Window Wiring Routing 1966 - NCRS Discussion Boards

C2 Power Window Wiring Routing 1966

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Phil B.
    • Today
    #1

    C2 Power Window Wiring Routing 1966

    Hi - converting a 1966 Coupe to Power Windows. I have the correct wiring harness, but am not sure of exact routing of the wiring. Does it start at the switch cup head towards the back of the car, then doubles back and runs under the carpet towards the dash. Is this correct and if so which side (Passenger). Any pictures or diagrams? Any recommendation where to get rubber grommets forthe fire wall? Thanks.
    Tags: None
      • Top
    • John H.
      Beyond Control Poster
      • December 1, 1997
      • 16513
      #2
      Re: C2 Power Window Wiring Routing 1966

      Section A31 in the Assembly Manual shows the harness installation and routing in detail. There are no firewall grommets associated with power windows, but Doc Rebuild has them for all the other applications.
        • Top

        Comment

        Previous template Next
        Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"