1968 Corvette - NCRS Discussion Boards

1968 Corvette

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jay L. Flinders

    1968 Corvette

    Wiring problems. On the engine wiring harness there is a fuseable link that connects two red #10 wires with a black # 14 wire. This fuseable link is gone. Is there any place that these fuseable links can be purchased? Or how can it be repaired without buying the complete harness?

    Thanks Jay
  • Pat K.
    Expired
    • November 1, 2003
    • 351

    #2
    Re: 1968 Corvette

    Did you try Lectric Limited?

    Comment

    • Dick W.
      Former NCRS Director Region IV
      • June 30, 1985
      • 10483

      #3
      Re: 1968 Corvette

      Should be able to buy a fusible link from major parts suppliers, NAPA, Carquest, etc
      Dick Whittington

      Comment

      • Jack H.
        Extremely Frequent Poster
        • April 1, 1990
        • 9906

        #4
        Amen, Dick--any auto parts store... *NM*

        Comment

        • Terry F.
          Expired
          • September 30, 1992
          • 2061

          #5
          Re: 1968 Corvette

          If you are talking about the large black rubber thing that encircles the wire, I have some originals off a wire harness. Let me know if this is what you need. I can probably send you one. Terry

          Comment

          Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"